Lawn mower, also known as mower, is mainly used for mowing and beautifying lawn in park, factory, golf course and other places.
Lawn mower is divided into two parts: engine and chassis. The engine is a single cylinder, air-cooled, four stroke gasoline engine. When in use, the gasoline tank is filled with pure gasoline and the oil tank is filled with lubricating oil.
The chassis is equipped with an operating handle, a clutch line and a clutch control lever, a throttle line and a throttle switch, a straw bag shelf, a straw bag and a blade. During the start-up and operation, operator’s hands must firmly hold the clutch control lever. The throttle switch controls the opening and closing of the choke valve of the carburetor. When the cold engine is started, push forward to close the choke valve. After starting, pull backward to open the choke valve.
The hand-push type lawn mower mostly uses a 5.5 horsepower engine, with a displacement of 163cc, a cutting width of 50cm, and a chassis adjustment height of 2-7cm, which depends on manpower to move forward.
The self-propelled lawn mower is driven by the transmission shaft and the working efficiency is higher.
The lawn mower car has high horsepower, cutting width of 100 cm, and the working efficiency is the highest.
First of all, it is necessary to determine which type of lawn machine to choose, and then make a specific brand selection.
Precautions for use of lawn machine
1. Before use, make sure that the lubricating oil is sufficient, neither less nor more.
2. Check the air filter regularly and keep it clean; never run the engine without air filter.
3. For initial use, run in at low speed for 15 minutes.